| Additional Cutting Methods for SERVOCUT 402 |
| GR 0925 |
Software package for optional cutting methods; |
| |
*Diagonal Cut |
| |
*Step Cut |
| |
*Segment Cut |
| |
|
| Power Supply for SERVOCUT 402 |
| GR 1224 |
Transformer kit for 200-240 VAC, 3 phase, 50/60 Hz mains voltage |
| |
|
| Cooling Systems for SERVOCUT 402 |
| GR 1544 |
Recirculation Cooling Tank, 135 lt, for SERVOCUT 502/402 |
| YM 8815 |
Fine filter sheets for recirculation cooling tank (GR 1544), 10 pcs |
| GR 1559 |
Coolant level sensor for recirculation cooling tank |
| |
Informs operator when coolant level is insufficient. (for MA and AA models) |
| GR 1540 |
Magnetic collector rod for recirculation cooling tank |
| GR 1553 |
BANDCOOL Band Filter Unit for SERVOCUT 502/402/302 |
| |
Band filter conveyor for the automatic collection and disposal |
| |
of swarfs, with capacity of 115 lt, with fluid level indicator, |
| |
complete system on wheels, with connection kit. |
| |
400V, 3-phase, 50 Hz |
| YM 8877 |
Filter roll for BANDCOOL, 50 m |
| |
|
| Accessories for SERVOCUT 402 |
| GR 1554 |
FUMEFILTER Centrifugal Separator |
| |
Removes coolant mist for better illumination and viewing |
| |
(To be ordered simultaneously together with the machine order) |
| GR 0139 |
AUTOCLEAN Automatic Cleaning System for cutting chamber |
| |
(To be ordered simultaneously together with the machine order) |
| GR 0140 |
3-lights warning beacon with audible signal |
| |
(To be ordered simultaneously together with the machine order) |
| GR 0125 |
Laser alignment unit |
| |
(To be ordered simultaneously together with the machine order) |
| GR 1707 |
Manual/Auto Table drive system with electromagnetic clutch(y-axis) |
| |
(To be ordered simultaneously together with the machine order) |
| GR 0992-01 |
Flange Set with larger diameter, Ø133 mm |
| |
|
| Clamping Devices for SERVOCUT 402 |
| GR 0029 |
Quick Acting Clamping Vise Assembly, Right, for SRC 402 (Stainless Steel) |
| GR 0030 |
Quick Acting Clamping Vise Assembly, Left, for SRC 402 (Stainless Steel) |
| GR 0154 |
Compact Vise Assembly, Spring Loaded, for SRC 402 (Stainless Steel) |
| 15 02 |
MBU 1031 Vertical Clamping Device with clamping shoe, clamping height up to 115mm. |
| 15 04 |
MK 10 22 Height Block, 70 mm |
| GR 0310 |
Fastener vise for longitudinal sectioning of screws, ball joint, tubes, etc. from 60 to 100 mm in length |
| GR 0312 |
Fastener vise for longitudinal sectioning of screws, ball joint, tubes, etc. from 90 to 150 mm in length |
| GR 0609 |
Serial Clamping Device for clamping multiple specimens from 1 to 3 |
| GR 0612 |
Angular Precision Clamping Device in 3-Axis Direction |
| GR 0033 |
Chain spanner set with anchor block |
| 15 00 |
V-Block for holding parts above table slots |
| GR 0615 |
Adjustable V-Support, Small (Height Range: 57-67 mm) |
| GR 0616 |
Adjustable V-Support, Medium (Height Range: 65-85 mm) |
| GR 0617 |
Adjustable V-Support, Large (Height Range: 85-115 mm) |
| GR 0618 |
Adjustable V-Support, Extra Large (Height Range: 115-155 mm) |
