Home Product Utest Concrete

Product detail

EN - Automatic Four Column Compression Testing Machines for Cubes and Cylinders

Views:
323

Keyword tag: ,

AUTOMATIC Compression Testing Machines

EN - Automatic Four Column Compression Testing Machines for Cubes and Cylinders

Product Code

UTC-6727.FPR	2000 kN Capacity Four Column Compression Testing Frame, for Cubes and Cylinders, EN
UTC-6737.FPR	3000 kN Capacity Four Column Compression Testing Frame, for Cubes and Cylinders, EN
UTC-6748.FPR	4000 kN Capacity Four Column Compression Testing Frame, for Cubes and Cylinders, EN
UTC-6758.FPR	5000 kN Capacity Four Column Compression Testing Frame, for Cubes and Cylinders, EN
UTC-0210	High Precision Pressure Transducer and Electronic
UTC-4684	Pedestal for 2000 kN and 300 kN Four Column Compression Testing Frames
UTC-4686	Pedestal for 4000 kN and 5000 kN Four Column Compression Testing Frames

Models for 220-240V, 50-60Hz, 1ph	UTC-6727.FPR	UTC-6737.FPR	UTC-6747.FPR	UTC-6757.FPR
Models for 110V 60 Hz	UTC-6727.FPR -N	UTC-6737.FPR -N	UTC-6747.FPR -N	UTC-6757.FPR -N

Standards

EN 12390-4, EN 12390-3

UTC-6727.FPR, UTC-6737.FPR UTC-6747.FPR and UTC-6757.FPR models Automatic Four Column Compressıon Testıng Machines are manufactured for compression testing of cubes and cylinders acc. to EN. These machines also meet the requirements of CE norms with respect to the health and safety of the operator.

The machines allow inexperienced operators to perform the test. Once the machine has been switched on and the specimen is positioned and centered by the help of fixtures or/and concentric centering lines of lower loading platen, the only required operations are;

Setting test parameters, including pace rate (only required when the specimen type is changed).
Pressing the START button on the control unit.
The machine automatically starts the rapid approach, when the specimen touches the upper platen the rapid approach is ended and starts loading at the pace rate that selected by user and stops once the specimen fails.
Automatically saves the test parameters and test results.

The Machines consist of a welded steel frame (see table) and UTC-4830FPR automatic hydraulic power pack with U-Touch PRO Control Unit.

Main Features

Pace Rate control between 1 kN to 25 kN

Accuracy Class 1 acc. to EN 12390-4 starting from with the 5% of the machine capacity (Special calibration option Class 1 starting from 1% of the full range with UTC-0210)

Supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4

Tests automatically with closed loop control
The tests can be performed by controlling the machine either on U-Touch PRO control unit (UTC-4930.FPR) or on a computer with using free UTEST Software (USOFT-4830.FPR) which is provided free of charge with the machines.

Load measurment with a pressure transducer
Hydraulic pump with dual stage for rapid approach
Welded steel walled frame with a single acting piston
Piston return at the end of test automatically

U-Touch PRO Control Unit

U-Touch PRO Control Unit UTC-4930.FPR is designed to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines.

All the operations of U-Touch PRO are controlled from the front panel touch screen display.

U-Touch PRO Control Unit has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Digital graphic display is able to draw real-time "Load vs. Time", or "Stress vs. Time" graphics

PLEASE see the pages of “U-Touch PRO Control Unit UTC-4930.FPR” for details of the properties

UTEST Software for Automatic Compression / Flexure Testing Machines

UTEST software USOFT-4830.FPR provides to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines

The advantages of performing tests on computer with using UTEST Software, such as reporting, graphical output, etc. can be seen in detail at the USOFT-4930.FPR (The UTEST Software for Automatic Compression / Flexure Testing Machines with UTC-4830FPR Hydrolic Power Pack) pages.

Optional Additional Frame

For compression and especially flexural testing, additionally second testing frame should be ordered separately.

In this case, the machines provide load control of two seperate testing frames with closed-loop P.I.D control with automatic test procedure by using selecting test channel And additional selector valve.

Safety Features

Maximum pressure valves to avoid machine overloading
Limit switch for piston stroke
Emergency stop button
Removable transparent front and rear safety doors
Software controlled maximum load value
The front safety doors have an automatic safety device to stop the machine if the door is opened during a test.

EN AUTOMATIC FOUR COLUMN COMPRESSION TESTING MACHINES FOR CUBES AND CYLINDERS
Models	UTC-6727.FPR	UTC-6737.FPR	UTC-6748.FPR	UTC-6758.FPR
Product Photo
Capacity	2000 Kn	3000 kN	4000 kN	5000 kN
Frame Type	Four Column	Four Column	Four Column	Four Column
Lower Platens Dimensions (D)	Ø 300 mm	Ø 300 mm	Ø 360 mm	Ø 360 mm
Upper Platens With Ball Seating Assembly Dimensions (C)	Ø 300 mm	Ø 300 mm	Ø 360 mm	Ø 360 mm
Surface Hardness of Loading Platens	≥ 53 HRC	≥ 53 HRC	≥ 53 HRC	≥ 53 HRC
Flatness Tolerance	0,03 mm	0,03 mm	0,03 mm	0,03 mm
Piston Diameter	250 mm	310 mm	360 mm	400 mm
Piston Stroke	50 mm	50 mm	100 mm	100 mm
Maximum Vertical Clearance Between Platens (E)	350 mm	350 mm	520 mm	520 mm
Sizes of Specimens For Cubes	200 mm (**)	200 mm (**)	200 mm (**)	200 mm (**)
Sizes of Specimens For Cylinders (up to)	Ø160x320 mm	Ø160x320 mm	Ø250x500 mm (**)	Ø250x500 mm (**)
Power	750 W	750 W	750 W	750 W
Oil Capacity	20 L	20 L	20 L	20 L
Maximum Working Pressure	410 Bar	410 Bar	410 Bar	410 Bar
Dimensions (wxlxh) (Axd*xG)	960x560x1100 mm	1050x690x1150 mm	1145x825x1540 mm	1145x825x1570 mm
Weight	1020 kg	1520 kg	2570 kg	2625 kg
Pedestal (Optional)	UTC-4684	UTC-4684	UTC-4686	UTC-4686
(d) depth () Limited by capacity of the frame The machines for cubes and cylinders are supplied complete with;* • 100 mm, 50 mm, 30 mm height x Ø205 mm distance pieces (two pcs. each for UTC-6748 and UTC-6758) • UTC-4622E - Fixture for Centering Specimens, compatible with Ø300 mm lower loading platen for 100 mm and 150 mm cubes, Ø100 mm and Ø150 mm cylinders(for UTC-6727 and UTC-6737) • UTC-4624E - Fixture for centering specimens, compatible with Ø360 mm lower loading platen for 150 mm and 250 mm cubes, Ø150 mm and 250 mm cylinders (for UTC-6748 and UTC-6758) • Removable transparent front and rear safety doors. Appropriate distance piece/s for the cylinder and cube specimens with the height of lower than 150 mm should be ordered separately.