■ Discharge of deposits during vulcanization to the outside

This is a dedicated device that uses a powerful fresh air suction circulator to increase circulation efficiency, discharges precipitates to the outside, and performs secondary vulcanization.

■Easy-to-operate double door

To prevent the temperature inside the chamber from dropping when the door is opened and closed and to increase the productivity of heat treatment work, double doors are standard and the door turning radius has been reduced by half.

■Auto start/auto stop/wait functions are standard features

The newly developed controller provides enhanced auto start, auto stop and wait functions. No operation is required for vulcanization. In addition, the initial setting is stored in memory, so from next time onwards operation can be completed with a single touch.

High productivity born from a wealth of experience

■ Short temperature rise time and uniform temperature distribution

The heater's high heat exchange efficiency and unique hot air stirring technology enable a short temperature rise time and uniform temperature distribution, even though the system is a fully forced exhaust system.

■Double doors are standard equipment

The double-door design allows for easy access to the chamber, such as when removing specimens. It also minimizes operator movement compared to a single-door design, reducing stress and increasing work efficiency. The narrow opening range at the front allows for effective use of limited installation space.

■ Increase efficiency with dedicated racks and rack carts (optional)

By setting up the samples to be heat-treated on a dedicated rack in advance, the time required to change samples can be reduced. This significantly improves the efficiency of heat treatment work and also reduces the amount of work inside the chamber, increasing safety.

Improved quality

By adopting a one-way, completely forced exhaust system from intake to exhaust, deposits produced during vulcanization are efficiently discharged outside the tank.
Residual low molecular weight siloxanes and other substances can be efficiently removed, contributing to stable quality and improved yield. *Please be sure to connect a duct to the exhaust port before use.

Achieving both safety and maintainability

The forced exhaust system allows fresh outside air to always pass through the heater unit, significantly reducing deposits on the heater compared to the circulation system.
By suppressing deposits that can easily cause smoke or fire, high safety is ensured, and odors and dirt around the heater unit and door are also kept to a minimum.
In addition, the system is designed to allow easy access to each unit, making it easy to maintain, even for periodic cleaning and replacement work.