Home Product Sample Preparation Machine METKON

Product detail

METACUT 302

Views:
1924

Keyword tag: ,

Abrasive Cutting Machine

Microprocessor controlled, front panel with touch-pad controls, compact powerful 3 kW motor, electronic brake system, cutting capacity up to 115/90 mm solid stock, for cut-off wheels up to Ø300/250 mm, twin T-slotted clamping table 255x250 mm made of stainless steel, bottom part as rugged alloy base casting, ABS protective hood, Ready for operation. Without clamping devices, without recirculation cooling tank. 400 V, 3 phase, 50 Hz.
Includes a standard set of cutting consumables composed of;
*1 pack of medium type 10 cut-off wheels 250 mm dia.
*1 pack of medium type 10 cut-off wheels 300 mm dia.
*5 lt of METCOOL cooling fluid.

Technical Specifications

ORDER NO	10 05
MODEL NO	METACUT 302
Cutting Power kW(S1)	3
Cutting Power kW(S3)	4,6
Wheel Speed, rpm	2800
Operation	Manual
Wheel Diameter, (mm)	Ø300 / Ø250
Cutting Capacity, ø (mm)	Ø115 / Ø90
Cutting Capacity, # (mm)	50 x 195 / 50 x 165
T-Slot table dimension, (mm)	255 x 250
T-Slot dimension, (mm)	12
Size, WxDxH, (cm)	58 x 68 x 49
Weight, (kgs)	132
Cooling Unit, (lt)	60
Mains, (V)	3 phase 400 V, 50 Hz

Accessories

Cooling System for METACUT 302
GR 0019	Recirculation Cooling Tank, 60 lt, for METACUT 302
YM 8813	Fine filter sheets for recirculation cooling tank (GR 0019/GR 1675), 10 pcs
GR 1540	Magnetic collector rod for recirculation cooling tank

Clamping Devices for METACUT 302
GR 0012	Quick Acting Clamping Vise Assembly, Right, for MTC 302 (Stainless Steel)
GR 0013	Quick Acting Clamping Vise Assembly, Left, for MTC 302 (Stainless Steel)
GR 0151	Compact Vise Assembly, Spring Loaded, for MTC 302/SRC 302 (Stainless Steel)
15 01	MBU 1011 Vertical Clamping Device with clamping shoe, clamping height up to 90 mm.
15 03	MK 10 21 Height Block, 60 mm
GR 0453	Fastener vise for longitudinal sectioning of screws, fasteners tubes, etc. from 12 to 45 mm in length

Accessories for METACUT 302
GR 0939	Cabinet for floor model, MTC 302

Consumables

Treno Series Abrasive Cut-off Wheels (Pack of 10)
TRENO-Ti	19-019	Ø 250 mm, for Titanium and Very Ductile Materials
TRENO-NF	19-020	Ø 250 mm, for Non-Ferrous Steels
TRENO-H	19-021	Ø 250 mm, for Soft Steels < 23 HRC
TRENO-M	19-022	Ø 250 mm, for Medium Hard Steels > 23-55 HRC <
TRENO-S	19-023	Ø 250 mm, for Hard Steels > 50-60 HRC <
TRENO-SS	19-024	Ø 250 mm, for Very Hard Steels > 60 HRC
TRENO-NF	19-040	Ø 300 mm, for Non-Ferrous Steels
TRENO-H	19-041	Ø 300 mm, for Soft Steels < 23 HRC
TRENO-M	19-042	Ø 300 mm, for Medium Hard Steels > 23-55 HRC <
TRENO-S	19-043	Ø 300 mm, for Hard Steels > 50-60 HRC <
TRENO-SS	19-044	Ø 300 mm, for Very Hard Steels > 60 HRC

Long Life Abrasive Cut-off Wheels (Pack of 10)
TRENO-DUR	19-026	Ø 250 mm, for Extremely Low Consumption Rate with Optimum Surface
		Quality for High Volume Cutting Operations, Cut-Check Applications, etc..

Ultra Thin Abrasive Cut-off Wheels (Pack of 10)
TRENO-HT	19-031	Ø 250 mm, 1.0 mm thickness, for Soft Steels > 20-35 HRC <
TRENO-MT	19-032	Ø 250 mm, 1.0 mm thickness, for Soft&Medium Hard Steels >38-58 HRC<

Cuto Series Abrasive Cut-off Wheels (Pack of 10)
CUTO-M	19-022/A	Ø 250 mm, for Soft&Medium Hard Steels up to 50HRC
CUTO-S	19-023/A	Ø 250 mm, for Hard Steels > 50-60 HRC <
CUTO-M	19-042/A	Ø 300 mm, for Soft&Medium Hard Steels up to 50HRC
CUTO-S	19-043/A	Ø 300 mm, for Hard Steels > 50-60 HRC <

Diamond Cut-off Wheels (1 pc) for METACUT & SERVOCUT
DIMOS	19-250	ø 250 Diamond Cut-off wheels (Metal Bonded, high conc.)
DIMOS	19-251	ø 250 Diamond Cut-off wheels (Resin Bonded, high conc.)
DIMOS	19-300	ø 300 Diamond Cut-off wheels (Metal Bonded, high conc.)
DIMOS	19-301	ø 300 Diamond Cut-off wheels (Resin Bonded, high conc.)

Cutting Fluid
METCOOL	19-902	Nature Friendly Soluble Oil, 5 lt.
METCOOL II	19-905	Nature Friendly Soluble Oil, 1 lt.
METCOOL-NF	19-906	Nature Friendly Soluble Oil, 5 lt.
		Perfect corrosion protection for reactive metals like copper, brass,
		cobalt, aluminum, tungsten carbide, etc…